|
|
By ChrisGamingExpert March 16, 2010 4:50 AM
Xbox 360 as a disassemble controller
Several opening Xbox 360 tutorials are already out there. Always one wait until it have something intellectual to say on a subject before doing up a tutorial.
It is now opened and reassembled many 360's and will go over the process to be used to open and re-assemble them. The thing to remember is when to do it right just pops apart, or it will be very saddening with the results.
The xcm 360 case opening tool offers both the torx 10 driver needed to remove the lid and an imaginative metal tab device that allows you to easily release the plastic clips on the back of the 360, and a poker to release the clips holding the top and bottom vent covers.
Xbox 360 disassemble tutorial instructions
Xbox 360 disassemble tutorial is provided
with instruction guide
following that one can perform well
without out side help.
There is an xcm 360 tool with that as told earlier, this tool can be replaced with a small screwdriver, see above external tutorial links for details on that process. It offers both the torx 10 driver needed to remove the lid and an quick-witted metal tab device that allows you to easily release the plastic clips on the back of the 360, and a poker to release the clips holding the top and bottom escape covers.
Tool can be replaced with a small screwdriver, external tutorial links for details on that process. Starting with the gray bottom utter plate, six tabs that hold it into place. All of them are accessible commencing the sides through the emit holes.
Tenderly pull up on the plate and concurrently release the clips by pushing in with the opening tool or other tool that fits. Start at the front of the case and work your way back alternating sides so each pair of tabs are unconfined.
The top plate offers a bit more of a challenge 3 of the six tabs are not in plain sight, begin with the front two, they can be accessed from the two corresponding holes where the drive tray connects.
Stop wasting time! Click here to get your Xbox360 fixed in less then 57 Minutes Now!
