|
|
By ChrisGamingExpert February 26, 2010 8:43 AM
X clamp replacement xbox 360 - Solution for Ring of Death
The X clamp replacement xbox 360 can really the solve the red ring of death once and for all. The red ring of death is a problem which none of the Xbox owners want to experience. The X clamp replacement xbox 360 can be an effective solution pertaining to the problem of the 3 red lights. ?
You may ask why does this red ring of death occur. The primary cause of this problem is the breaking of the connection between the graphic processing unit and the motherboard. This can happen if the soldering becomes loose. The breaking of the soldering is a manufacturing defect which must have been overlooked while designing the product.
The metal housing of the Xbox 360 is not completely straight bended which it should have been. This is big flaw in the production technique. On this bended portion the graphic control unit is housed, which means when you screw the graphic unit with the motherboard it get bent like the metal housing.
The pressure exerted on to the set up and also the motherboard falls on the soldered grid ball. After sometimes it is bound break away due to the same reason.
The original X clamp provided by the company does not exert the required pressure on the heat sink to make the motherboard connected properly to the graphics unit. This X clamp is made up of simple steel, which over a period of time loses the tension, and it does not serve the purpose.
Spring steel X clamp replacement xbox 360 is the best solution to counter this problem. This type of steel has the enhanced tensile strength and can create more pressure on the heat sink to keep it straight. X clamp replacement Xbox 360 is the only way out of the problem. Here are certain important parts, which you would require in order to make the
-Low height Lens head stainless steel machine screws of the dimension 5mm x 10mm. The heads of these screws are bigger so when you drill a hole do not forget to make it a bit larger. 4 such screws are required for x clamp replacement Xbox 360. ?
- 5mm spring washers of high tensile steel 4 in number. These washers would also keep the pressure high and not let the connection break away. Once fixed these washers stay in place.
- 1 mm thick distance washers of Nylon four pieces. These distance washers are made of heat resistance nylon. Nylon is preferred as it is as hard as steel and also avoids short circuits. The distance between the motherboard and the heat sink is extremely important. It must be optimum. ?
- 1 mm thick stainless steel washers 4 pieces. These washers are placed on the top of the nylon washer to achieve the optimum distance of perfect 2mm. This distance is also very important. It will exert the right pressure on the heat sink.
Xbox 360 x clamp replacement - What you need
.jpg)
x clamp replacement Xbox 360. These parts are,
Stop wasting time! Click here to get your Xbox360 fixed in less then 57 Minutes Now!