|
|
By ChrisGamingExpert November 28, 2009 10:15 AM
Xbox 360 repair instruction - How to start?
First put your fingers into the memory slot and at the same time put your thumb under the device to pull off the front plate. Do it with little bit of force but don't be too hard on it. This is also an important Xbox 360 repair instruction.
Here you will come across the silver colored seal of Microsoft. If you break that seal the warranty of this product gets void. So, you got to decide whether you are going to break it or not.
As per the Xbox 360 repair instructions turn it on its side. Remove the sides cover followed by the top and bottom gray covers with the help of a pointed tool.
The next part is to remove the machine from the internal casing. Look at the rear end of the device you will find small notches. With the help of a flat screwdriver, probe in on left by the power plug socket and press on the catch.
Follow the Xbox 360 repair instructions very carefully. Repeat the procedure with the rest of the catches. After you have finished you can completely lift away the casing.
Xbox 360 repair guide - Final steps
As per the Xbox 360 repair instructions, use the T10 and T8
screwdrivers as per the Xbox 360 repair instructions to unscrew 6 T10 black screws followed by the silver screws. Then use the T8 screwdriver to unscrew the rest of the black screws. Now come to the critical part of removing the DVD drive, the motherboard, and the microprocessor.
For further enquiry you can visit http://www.dtheatre.com/Xbox360Fixer/ for Xbox 360 repair instructions.
Stop wasting time! Click here to get your Xbox360 fixed in less then 57 Minutes Now!