Taking your Xbox 360 apart without any problems | take your Xbox 360 apart

Take your Xbox 360 apart - Why and what you need

Sometimes due to the constant usage and exposure of the electronic devices they gather dust. Removal of this dust without taking your Xbox 360 apartbecomes really difficult. Apart from that you would also need to take your Xbox 360 apart incase it is not working or you need to repair something.

For repairing of removing a device from the gaming console you would require technical expertise. It would always be a better option if you consult a professional with technical knowledge in this area to tackle the problem if you do not posses the required technical know-how.

In order to take your Xbox 360 apart you would require certain specific tools.

Please do not try to pull apart Xbox 360 apart without these tools, it can cause serious damage to the device.

The tools are small flat bladed screwdriver, T10 Torx screwdriver, T8 Torx screwdriver, nut driver with 5/16 socket, needle nose pliers, wire cutters and dykes.

You can easily find them in your toolbox or if you don’t have one, they are widely available in store selling computers accessories.

Xbox 360 take apart guide to follow

Before taking your Xbox 360 apart, gather all your tools and also other objects such a piece of soft and clean cotton cloth, a couple of painting brushes with soft tips, a small bowl, etc. While you are taking your Xbox 360 apart use the bowl to put in the small screws and nuts so that you don’t lose them. The DVD player and the hard drive should kept on the soft piece of cloth. Use the soft brushes to remove the accumulated dust inside the system.

First put you middle and index fingers in memory slot and simultaneously place the thumb at the bottom of your gaming console. Pull off the front plate steadily but smartly using the thumb as a lever and it comes right off. You will see the silver Microsoft seal. Break the seal but before that you should know once you break the seal your warranty gets void.