Printable version

 To print: Click here or Select File and then Print from your browser's menu

	--------------------------------------------------------------
	This story was printed from dtheatre.com,
	located at http://www.dtheatre.com/read.php?sid=5110.
	--------------------------------------------------------------

Should I Use Xbox 360 tool kit?
By ChrisGamingExpert, (DT)
December 15, 2009 6:50 PM PT

The Process of Unlocking Xbox 360 with Xbox 360 opening tool for Xbox 360

After opening the vent covers from the sides you should now lay the box on the surface. By using the Xbox 360 opening tool once again position the two holes in line with t he power cord.

Use the tool and put a little bit of force to click open the clips leading to the opening of the Xbox. Continue to do this until you hear several clicking sounds making way for you to open the Xbox. The case opens with a little more effort on the part of the opener.

Using the opening tool remove the clip from the region around the DVD. Repeat this once again for the next of the couple of clips.

After removing the clips you will find 6 screws attached to the box. Use the torx screw driver to get rid of the screws. Flip the side and repeat the process. Lift the cover and you will find several parts inside the Xbox ready to use.

The Importance of Using the Xbox 360 disassembly tool, Xbox 360 repair tool

Therefore, following these simple steps you can open the Xbox 360 using the Xbox 360 opening tool and the Xbox 360 disassembly tool. Xbox 360 without tool is almost impossible to use. Hence, you have to rely on the tools for Xbox 360 to prepare the device to be used by you.