|
To print: Click here or Select File and then Print from your browser's menu
-------------------------------------------------------------- This story was printed from dtheatre.com, located at http://www.dtheatre.com/read.php?sid=4991. --------------------------------------------------------------
|
How to Unscrew Xbox 360- It's Requirements By ChrisGamingExpert, (DT) November 25, 2009 10:51 PM PT |
How To Unscrew Xbox 360 Without Hassles?Have you ever faced a situation where knowing how to unscrew Xbox 360 has come across as necessary? If not, then sooner or later, you might. It is so because when in use they function perfectly. But once you give it a break, due to dust accumulation you face perennial problem of gadgets, that is, malfunctioning.
Here comes the need of unscrewing, disassembling and repairing it. If within the warranty period, then you can call the Helpline at Microsoft. But if not, then instead of wasting money you would prefer to do it yourself. So it is very important to get a know how of how to unscrew xbox 360 at home.
To be prepared for such situations you should learn how to unscrew xbox 360 beforehand. This will help you in taking apart the xbox controller, hard drive, motherboard etc.
To know how to unscrew xbox 360, only theoretical knowledge would not help. You need to acquire some practical knowledge as well. For that, you need to be prepared with the tools that are the must-haves for unscrewing the gaming console.
These tools include a T8 and T10 Torx screwdriver, screwdriver of flat blade, nut driver with 5-16 sockets and so on. The manuals and different websites would brief you on how to unscrew xbox 360. When learning how to unscrew xbox 360, the first needful is caution. A small miss here and there can lead you to a permanent and irreparable damage to the console. So, knowing how to unscrew xbox 360 becomes very crucial.
Technically speaking, the things required to unscrew xbox 360 controller are very mundane and simple tools. They are no 1 or no 2 flat nose screwdrivers, no 0 or 1 screwdrivers of Philips and T8 Torx Screwdriver for dismantling the controller. Apart from these a small container and a table are the two things which you would not find in any booklet of teaching how to unscrew xbox 360. You will need the container to store the small parts that you took off the console and the table as workstation. |
|
.jpg)