Disassemble xbox 360 motherboard video - Things to do

By ChrisGamingExpert on 2010-01-19 23:42:22

Disassemble xbox 360 motherboard video - All you need

The things required according to the disassemble xbox 360-motherboard video in order to go on with the process, are very simple. These daily use objects are easily available in the market. Even the process of disassembling is not a tricky one. All you need to do is play cautious when you are up to disassemble an xbox 360 controller because your little carelessness can land you up with a damaged console.

The disassemble xbox 360-motherboard video suggests that you will require simple tools like-

• One flat nose screwdriver of either no 0 or no 01. You will need them to pry lights
• One no 0 or no 01 screwdriver by Philips. These are used for the several things including the Directional Pad that is used for changing directions.
• The Torx screwdriver with holes in the middle. No 8 and no.10 of this variety comes handy in such cases.
• A table of standard dimensions that will be the workstation for the entire procedure.
• A small bowl to keep the tiny spare parts like nuts, springs, buttons etc

According to the disassemble xbox 360-motherboard video you need to be very delicate and cautious about it. A little negligence from your side can lead to the crash of the total system. Also, the left over of warranty period will be treated as null and void. The disassemble xbox 360-motherboard video advises, only when you are confident about fixing the issues. If not, Microsoft is always ready at the distance of a phone call.

To disassemble an xbox 360 controller - Demonstration of Steps

For better understanding of the process follow the disassemble xbox 360 motherboard video, there is one video, which helps you fix the problem. If you watch this video, will find the visual demonstration of the guidelines pertaining to disassemble an xbox 360 controller that you have been asked to practice. This video includes steps to disassemble xbox 360-motherboard video.

The first step to disassemble an xbox 360 controller according to the disassemble xbox 360-motherboard video is the removal of battery from its back. Never start the disassembling process without this step. Beneath the battery there is an UPC tag of code which must be removed to be replaced. But before removing it, keep it in mind that the warranty gets void once you peel it off.

There are a total of eight screws that you need to unscrew in order. Follow the disassemble xbox 360-motherboard video carefully. However, last screw of the lot is not fixed with the controller. Hence, when you disassemble it may come apart. So you need to be careful about it.

The actual process of disassembling starts when the lower panel is removed. To disassemble an xbox 360 controller, the device of headset plug in must be removed. After that, left and justify control needs to be removed followed by plastic circuit board along with the microchips and the processor. Just make sure you follow the procedure step by step in order to successfully disassemble xbox 360 motherboard video

You are currently Not Logged in.
Click here to login or sign up

Subject:  

xComment: