Use Xbox 360 opening tool kit? A guide to using tools kit

By ChrisGamingExpert on 2009-11-22 10:08:25

The Process of Unlocking Xbox 360 with Xbox 360 opening tool ( tools ) for Xbox 360

When you embark on a project you need to follow a process and this is also no exception. The Xbox 360 opening tool kit contains those tools with the help of which you will open the box.

However, there is a process which you must follow to be able to do it successfully without tampering the box. The method of opening the device using the tool for opening the Xbox are as follows:

The first thing you need to do is take out the faceplate. There is a hole at the base of the console and you need to put your finger inside it and pull it forward. The Xbox 360 opening tool is the perfect one for the two holes in front to remove the plate.

Use the opening tool for removing the clips that hold the gray bottom vent plate. You should begin from the end and reach the top by removing the clips from the alternate sides.

As you reach the top plate you will find that there are 56 tabs among which 3 are visible perfectly and the other 3 are not. The Xbox 360 opening tool is perfect for removing the plate by it using the 2 holes in the row connecting with the drive tray.

You are currently Not Logged in.
Click here to login or sign up

Subject:  

xComment: